Had to cut out most of the floor and build a new one. It's not finished yet, because I have not finished with mounting the engine & trans.
Originally I set the engine back about 14", but I am going to move it back forward about 4"-5" inches to gain back some room in the cab. The engine set back should help with handling.
Here's how it looks right now. The cab mounts have not been built yet, but the cab is tack welded in place so it can't get bumped out of place. The rear half of the frame will get cut off. I am planing on using 2"x3" or 2"x4" box tube for the back half. Due to the current budget, It will be leaf springs in the back for now.
