08-09-2010, 02:26 PM
|
 |
Member
|
|
Join Date: May 2006
Posts: 63
Thanks: 0
Thanked 0 Times in 0 Posts
|
|
Quote:
Originally Posted by jeff jordan
We always used the GE. Have found that the better the silicone, the better the results. I would give the silicone about 5-7 minutes, then start snug the bolts down in a star pattern and plan on about three steps (don't torque all the way down in one step). The bolt size will determine the final torque setting but most 3 piece end up about 24-27 ft lbs. Smooth out any pushed out silicone in the tire area and let sit about 24 hours.
|
Perfect, thanks 
|