i have a bit of a bastard child going on here.
the car came with a GMPP ls7 3 plug computer. and an old ls2 grey sensor 58 tooth front cam sensor with single bolt cam.
i havew a LQ9 6.0l that is all new with forged internals titanium retainter all studed ready to go.
so here is what i have done and used maybe it can help some one in the future. this is all to make the new ls7 fly by wire computer work
The parts I have used off the LS2
front timing cover with the cam pick up
grey crank pick up
parts i needed from GM
58 tooh reluctor #12586768
4 segment cam gear (for a 3 bolt cam) this is an ataptor gear that GM sells #12586481
i also needed the short balancer to work with the GM factory accessory drive #12635649
fly by wire throttle body #12570790
all of this is now mounted to the LQ9
and on paper it should all work
we will see next week.
the biggest PITA is figuring all this out on the fly one peice at a time.
i cant beleave how different the 2 motors are
|