[Roadster Shop]

1967-69 Camaro Chassis:

• Designed with minimal floor modification to retain 95% of the stock floor.
• Ride height is 1" - 2" lower than current sub-frame kits available.
• Maximum strength of a TRUE chassis to eliminate body flexing.
• Utilizes stock front bumper, core support, and front body mounts.
• Rear frame rail bolts into the stock spring hanger to easily align the chassis with body.
• Accomodate a 275-295 front tire on a 10" rim and a 345 rear tire on a 12" rim
• Retains stock gas tank

Only floor modifications required are a notch in the rear foot well and a pocket for the upper 4-bar. (Rough cut in this picture to allow room to work and fit suspension/brackets. Actual cuts can be much tighter to the chassis)






Sitting about 1.5" higher than actual ride height will be. Rear tire is 29.8" tall in this picture. The chassis was designed with a 28" tall rear tire. There is also no weight on the car)