1970-81 Camaro Chassis
- 4.5" - 5" ride height with full turning radius of a 275 front tire
- Maximum strength of a TRUE chassis to eliminate body flexing.
- Utilizes stock front bumper, core support, and front body mounts.
- Rear frame rail follow stock floor to retain a complete stock trunk floor
- Accomodate a 275-295 front tire on a 10" rim and a 345 rear tire on a 12" rim
- Dropped center crossmember for a dropped floor
- Front rails stepped in to utilize stock front fender lower mounts
(Will have a drop out trans crossmember that was not installed at time of picture)
Stock body mount at cowl is used. Frame rail kicked in to utilize stock fender mounts
Ride height mock ups.
