I have to agree that I don't see why not. I am planning 4 1/2 inch ride height for my project. I'm building the chassis around the suspension geometry. I'll be using Ride Tech Shockwaves with Viper suspension components. I am setting up a jig to adapt factory pick-ups and building my chassis at 4 1/2 inch rocker height around the jig. Shouldn't be a problem to do 4 inches as long as long as you maintain correct geometry. With 3 inches of total suspension travel, you should only see 1 1/2 inches at full extension or rebound which would be the roughest of road conditions if daily driving. Granted, I'm no engineer but this is what I've learned in my research. Someone else may have different/better information for you.
|