No not really. He was steps ahead of me more than I knew. I told him want I had planned and he ordered it this way and cut the cost down. I ordered AC Chevelle lower panels and had the new SS dash. I also had the block off plate for the fire wall, I also have ordered the AC dash center section w/vents so all the things that are included in the Chevelle package I would not use and or need. The only ball he dropped was not getting me the extra 3 vent adapters I needed. After I figured it all out I was happy not loosing any space in my glove box and the unit is tucked up higher, not much but every little bit helps.
I just went and plugged the new billet control knob harness into the VA box and it connected perfect. I am not sure where the problem might be in the install on that from what you are saying. Any guidance is great if I am over looking something here. I am not planning to hook the AC up until I drop the BB in so I will just be mounting the knob controller into the dash and not run it till later.
__________________
Nick's 1970 Chevelle project - '70 SBC 383 Stroker - Rushforth Rated X wheels - 14" Wilwood - Anvil Carbon Fiber hood/deck lid - Fesler billet - Corbeau Sport Seats, and still building....
YouTube & Chevelle pics - Instagram @nick.v70 & @ChevelleFactory
|