Quote:
Originally Posted by g356gear
I have been getting conflicting info about which is the better choice......especially when it comes to doors. Cost appears to be close to the same for each method. Any other opinions I can get would be appreciated.
|
I have no experience with dipped panels. But I would imagine the prep for epoxy primer is the same as with a chemical stripper.... Wash the product good and scrub with a scotch-brite to nuetralize the acid.
Where as media blasiting you can blow the panel off good, buzz over it with a DA and go to priming.
EDIT... Oh and neutralizing acid inside a door wouldnt be my first choice of fun tasks.. Much rather deal with a little sand than try to scrub the inside of my doors