ok this "Auto" LQ9 has no spacer the crank is just 3/8" (give or take) longer out the back than the LS2 i have here.
i have had to use a 3/8 spacer between the block and bell housing so the pilot shaft doesnt bottom out.
This is now a GONG SHOW
here is a pic of the starter, this is a 02 Camaro 6 spd starter, it is identical to the starter that came with the LQ9 Auto.
it needs to be 3/8 longer than this one is. the measurement on this pic is approx 1.75 this is the face of the outer mounting bolt boss
Last edited by Blake Foster; 08-19-2010 at 09:13 AM.
|