Quote:
Originally Posted by killer69
ok this "Auto" LQ9 has no spacer the crank is just 3/8" (give or take) longer out the back than the LS2 i have here.
i have had to use a 3/8 spacer between the block and bell housing so the pilot shaft doesnt bottom out.
This is now a GONG SHOW
here is a pic of the starter, this is a 02 Camaro 6 spd starter, it is identical to the starter that came with the LQ9 Auto.
it needs to be 3/8 longer than this one is. the measurement on this pic is approx 1.75 this is the face of the outer mounting bolt boss
|
Further checking shows only the LQ4 with 4L80E used the spacer. I would call Mc Leod again and see if they have a flywheel for this condition. I would also talk to Tony (Nineball).