Got some pictures for you guys but, it's not much.
I just realized that I don't have a good overall pictures of the 3 link in the car, so when I get the rest of the sheet metal cut out, I can post up a good picture of every thing.
Most of the brackets are done on the rear end, just have to add the sway bar mounts and bracing. I don't want to fully weld every thing together until I get every thing assembled and make sure every thing clears.
I wanted to put the calipers on the rear of the axle but it interfered with my panhard bar bracket, so I had to move them to the front. Since they are differential bore calipers, I can't swap them side to side to get the bleeder screws on top. I will have to swap the bleeder screws and the crossover tube around, but that shouldn't be a big deal.
Thanks,
Jon