Thread: AMD quarter panels for 1969 Camaro
View Single Post
  #44  
Old 10-08-2010, 08:18 AM
g356gear's Avatar
g356gear g356gear is offline
Senior Member
  
Join Date: Oct 2008
Posts: 660
Thanks: 0
Thanked 8 Times in 2 Posts
Default
Everything looks really good with the panels. Quality and metal thickness is top notch. Only thing that I noticed was along the gutter rail on the roof line. On the factory roof panel, there is a slight ridge just inside of the drip rail. That is not there on the AMD replacment quarter panel. Just a little detail that some people may not like. You can see it in the photo below right beside the clamp where the ridge ends and does not continue on the quarter.

https://lateral-g.net/forums/show...=20517&page=12



Other than that, with a little hammer and dolly work the gaps are near perfect.


__________________
69 SS396 Camaro Coupe, 4link, 12bolt posi, Speedtech LCA and UCA's, Hotchkis 2" drop springs and sway bar, Ridetech triple remote resevoir coilovers, Bilsteins, Wilwood 6 piston front/4 piston rear, Magnaflow stainless exhaust, Lemons Headers, Comp rollers/p-rods/cam, Fikse 18x8.5 and 18x10
Last edited by g356gear; 10-08-2010 at 08:23 AM.
Reply With Quote