We have been doing all the little things to finalize the body before paint. Of course, we did a few more things we did not count on. We did not like the cowl hood with the large spine down the center. It was also a bit uneven from the mold. The drivers side of the cowl was cut down and we made the top flat with a small body line down the center. The front nose is also near completion. All the lines where the nose pieces butt up against the fenders and nose extention are bonded and seams removed. The fiberglass deck lid with the molded spoiler was also modified. We added reinforcement to the spoiler and gave it more of a finished look.
A variety of other small custom items have been added.
Here is the hood before the modification
Grinding down the raised body line
Primed after modification
Deck lid modification
Big front meats under the new flare
More to come next week