Think I need a bit more help. Ive got the driveshaft in. It measures .7 degrees going down towards the rear pinion.
The trans is at 4 degrees down
The rear is at 2 degrees down
Front working angle = 3.3
The rear angle is where Im confused do I add or subtract them : 2 +.7= 2.7 deg or 2 - .7 = 1.3 deg
It doesn't seem to bad if the rear angles are added only 1/2 a degree apart. If it goes the other way theres 2 degrees between the two.
Thought?
Thanks Rich
|