Yeah, I think Musclerides is down, but I'm not sure if it is for good. I had a lot of build info in a thread over there so hopefully it comes back up.
It's a '65 era 327 with the camel hump heads (461) - 2.02 valves, some porting, etc. and a decent sized Ultradyne cam (I can't remember the specs), Edelbrock Performer RPM intake and 750 Carb. The tranny is 700R4 and the rear is a 9" with 4.11's. It should sound pretty good and be plenty spunky for the cruiser that this thing will be.
|