[run]

I am using leaf springs and don't want to go any other way than leaf springs.
I have dse mini-tub wheel houses and used offset spring hangers in the rear from competiton engineering part# 2032. I am tucking a 18x12 wheel under the car....here is my problem: now that I relocated the rear shackle, the front of the leaf spring will not bolt up to the factory spring pocket. instead of the leaf springs running parallel:

ideal: ||
mine: \ /

lol, best way for me to explain

is there any way to fix this without installing a tubular crossmember in the front for the front eye of the leaf spring to bolt to? I really want to run a stock or close to stock fuel tank, but as far as these c/e relocators move the leaf springs over...I see only a fuel cell in the trunk being my option, which I really don't want. My tires are 315/35/18...does anybody offer a different spring relocator that maybe does not move the spring over so much and will it be enough for my application to clear the tire?

Any and all help is appreciated.