Quote:
Originally Posted by vannatta20
Dont forget to measure your drivetrain angle. I think the tranny needs to be at -1 to -3. Do you need a poly tranny mount? My dad has an extra. Remember all the issues I had using rubbers. My stock LS1 ripped them in half. You should really change them.
|
yeah ive been thinking about that, as of now the angle is way too steep. Im not quite sure how to remedy it since i dont have a ton of room in the tranny tunnel to bring it up, and the only other option is to bring the engine down which would constitute cutting and altering the frame mounts to be lower.