Thanks for the compliments guys! We don't usually work on these newer vehicles, but we're doing what we can to take it over-the-top.
We machined these mounts for some hood struts so you don't have to carry a hood prop around with you. The hood from the factory had two springs and one shock holding it up, so we're using two of the stock shocks and it worked out great!
We incorporated the mount on the inner fender to one of the dimpled holes we have running the perimeter of the engine compartment.
You can also see the small mesh inserts we made. We machined dies to stamp the stainless mesh to match all of the dimple dies we have.