Holy S&$t TMI
i used the new Aeromotive Stealth fuel cell and all the related parts.
the A1000 pump is mounted verticaly in the cell, with a machined Bell about 1/4" from the bottom of the cell in a box that also is fed by the return.
so i run a from the pump a -8 supply to a inline 10micron filter up to the rear pass side fuel rail, cross over at the front to the drivers rail then out to the firewall mounted reg , then a -6 return to the cell. i also run a -8 vent, the fuel does get hot, the cell is between the mufflers and the heat comming off the exhaust runs right over it but the pump will work untill there is about 1/2 of fuel in the cell, so maybe 1.5 gallons left.
i run the Black braided hose which might help insulate the fuel a bit.
i couldn't be happier.
the system was put together with the help of Aeromotive and i think now i have a good handle on it.
my .02
|