Keith, KPI needs to be increased. Around 11* would work well to reduce scrub radius.
Derek, I already tried that, even at 1000 lot orders the price is still the same. The logic is that they are the only ones offering that service so there is no competition for you to shop at. They also mentioned that stay busy year round building and the process is the same for each, no timesavings by batch building.
Mike, the "A" and "F" spindles are interchangeable but the aspects that ATS changed were advantageous to the "F" body while only marginally helped the "A" body. They are better than "B" spindles but again, there are better options.
__________________
Dennis
|