Thread: Project "TQMNSTR"....69 Camaro
View Single Post
  #161  
Old 11-12-2010, 09:23 AM
g356gear's Avatar
g356gear g356gear is offline
Senior Member
  
Join Date: Oct 2008
Posts: 660
Thanks: 0
Thanked 8 Times in 2 Posts
Default
Final panel installation and alignment.






Alignment is great on the passenger side everywhere. Driver side is another story. We are tight at the cowl and wide at the header. We have decided to put the car on a rack and check the subframe alignment and see if the cowl could be off on the drivers side. We could make everything fit with the sub and cowl in their current position but I am not comfortable with that. If the car is apart...do it once...do it right.


__________________
69 SS396 Camaro Coupe, 4link, 12bolt posi, Speedtech LCA and UCA's, Hotchkis 2" drop springs and sway bar, Ridetech triple remote resevoir coilovers, Bilsteins, Wilwood 6 piston front/4 piston rear, Magnaflow stainless exhaust, Lemons Headers, Comp rollers/p-rods/cam, Fikse 18x8.5 and 18x10
Reply With Quote