not much of an update since its hard to take pictures of wiring.
got the fuse blocks mounted
the lamp harness and some of the ECM wires.
the main harness to the firewall is done and most of the wires are to the location they need to be and just need tied up.
got the EBCM mounted and the harness lengthened
so at work on friday we are throwing out all of the GM parts from when we were a Chevy dealer and i found this. its a rear HVAC module from an '03-'06 envoy extended.
because of the '01 dash conversion i did and the fire wall mods for the engine set back i had a TON of room. after some mock up and then putting the dash back in it fit!
