Doug/Kevin- Here are some pics of the exhaust to chassis.. As you can see we maintained all exhaust system underneth the frame rails with 3" inch pipe.. The DSE headers are a work of art!! They very nice.. You will have to run their engine mounts.. I used my own sub-frame bushings which drape the body over the sub about 1/2 an inch.. We are running this 68 as low as possible
Quote:
Originally Posted by DFRESH
Cris, I'll be over there soon---but wanted to ask---those DSE headers, do they actually stay above the frame rail when looking at the car from the side? (Meaning they don't actually hang below it). I know there isn't a lot of room there, but it appears from the pics that they are at least even with the frame rail. Are you using the half inch high body mounts on this car?
Doug
|
Quote:
Originally Posted by KPC67
I was wondering the same thing.
|
Don't mine @ all Ron! Thanks for the compliments on the work & the shop Ron.. Looking forward to working on your 69 here pretty soon!
Quote:
Originally Posted by flash911
(Chris, hope you don't mind me throwing an answer out here. No top secrect stuff!)
I was at the shop yesterday. Looking parallel at the car you cannot see the exhaust pipes below the frame rails, which is pretty amazing considering how low the car sits. Chris'll have to share other challenges/mods to make this happen.
It's an amazing build and a great shop (duh). For any of you that have not seen Chris' fat bottom cars in person, let me tell you they are sexy. Pictures just can't capture it; not too much that you look at it and say 'hot rod mods', and not too little that you don't notice. They're really just right, and Blue Ballz sits perfect!
|