Quote:
Originally Posted by ls1wot
Can anyone post pictures of the speedtech torque ARM installed on there car. Killer69 what rear setup are you running. Where does the front of the torque ARM attach to the trans crossmember or the sub frame. Do you know the weight of the kit? How's the clearance to the ground. Thanks
|
Well since the Nova is our new test car i have the complete "Track Time package including the ATS Spindles. the "Shipping weight is 120lb the actual weight of the product is 83lb that includes the shocks and springs.
there is no issue with ground clearance nothing is lower than the subframe rails. and the torque arm fits up in the drave shaft tunnel (depending on ride height of course)
The torque arm attaches to its own front X member that fits between the floor and the subframe. you can see the bare torque arm as well as it installed with 3" exhaust
also you can see the final ride height, this is not on airride this it the ride height and there are no issues.