Quote:
Originally Posted by killer69
Wheel size on a 68 that can be run is 18x9 6.375 BS this is on a stock sub with tall spindles and hight clearance upper arms.
but having said that this is ABSOLUTLY PUSHING THE LIMIT, and i will not be responsible for them rubbing if you go this route. the stock steering arm will be your buggest issue. the unisteer rack has a shorter steering arm and slightly smaller outer tie rod end, for what thats worth.
|
here is a Speedtech set-up- tall spindle- Unisteer with an 18x9 and 6in BS with a 275- I bolted the wheel on last night and was amazed at the turning radius- I would say the first thing that would contact is the upper A-Arm at the ball-joint with a tall spindle- If you are interested I can get some pics tonight from above showing lock to lock- Chris