Quote:
Originally Posted by elitecustombody
I'd use a porta-power as my last resort ,because it can cause more damage and try to get the body on a frame rack, clamp it down and pull door posts/hinge pillars forward.But if getting in on frame rack is not an option,use porta-power,just be very careful and check everything after each pump.Using wood blocks wrapped in a rag helps cutting down on damage
|
Thanks.... I know there is a big concern with damage using a porta-power. The good thing is that I have not welded the bottom of the firewall and the floor is not welded, just tacked in. If I did need to move the drivers side portion of the firewall forward 1/4", do you think I would be tearing the joint between the side cowl and the start of the rocker?