Quote:
Originally Posted by XcYZ
I'm using the Heidt's adjustable bypass on my Hydratech system. Here's my thoughts on it:
First off, there's no PS noise. I was wondering about that, but it's a non-issue.
The pedal has less initial bite.
The steering is noticeably firmer when I'm parked/not moving. It's slightly firmer at cruise speeds.
The biggest plus that I've experienced is there's less initial 'bite' or 'hit' of the hydraulic assist unit. The steering was only marginally affected. I've gone from one extreme to the other with the bypass and that seems to have been the biggest change.
Hope this helps.
|
Is it possible to install the bypass only on the brake side or if you put it in anywhere, it affects the entire system? Just wondering. We have the same problem with our hydra unit. WAY too much pressure to the front pads. Were talking 1400psi under hard braking.