I built one for my car, have maybe $200 bucks into it so far. Im planning to build a watts for it still. Here are a few shots of it thru the build process
3/4 x 3/4 rod ends from ruff stuff specialties, $144 for all 6 IIRC w/ tube adapters, jam buts and spacers. 3 RH thread, 3 LH thread
Lowers are 22 inches, upper is 9. Tube is 1.25 OD 0.120 wall DOM
Upper mount, 1x2 square tube and 1/8 plate, laminated in some important places
Redrilled the factory leaf spring mounts for the LCA mounts
Made my own axle mounts from 1/8 plate
Mounted in the car
