View Single Post
  #8  
Old 01-13-2011, 09:21 AM
fletcherscustoms fletcherscustoms is offline
Senior Member
 
Join Date: Dec 2005
Posts: 986
Thanks: 0
Thanked 0 Times in 0 Posts
Default

WE are getting the car ready to run across the Auction block at the Mecum auction January 25th-30th. Car is scheduled for 8:15 PM SAturday night in a FEature primetime spot. Doing some simple stuff like cleaning, painting, detailing little pieces etc. Also did some big changes did a complete overhaul on the looks of the motor. Removed the stamped steel valve covers and such, and replaced them with a set of cast aluminum covers that I spent almost 100 hours on hand polishing them, also replaced the air cleaner with a Billet piece. Also hooked up with Frank at Prodigy for a MArch Serpentine setup and Vintage Air unit. I can't even describe how much better it looks.

Also doing a few other things. I sold the 17's currently on it to Bill Howell so I will post pictures later today of the 19" Boze Forged Speedsters in a 19x8 ans 19x10. Did them with Polished hoops, and brushed centers with a polished line in the spoke. Also replaced the front 12" single piston brakes with 355 Z06 rotors with the 6 piston Z06 Calipers from KORE3.

heres the motor before the changes


Here is a crappy cell phone pic with the new addtions to the motor
__________________
Chad Fletcher
Fletcher's Customs and Speed
229-221-4690
[email protected]

Last edited by fletcherscustoms; 01-13-2011 at 10:48 AM.
Reply With Quote