I"ve seen the Speedway "Adjustable Tie-Rod Adapter Stud to Heim"
http://www.speedwaymotors.com/Adjust...Heim,3333.html
What is the taper on the stock 69 camaro spindle for the tie rod? I thought it was 7* but the GM one states 10*. I think the threads on a stock tie rod for a 69 Camaro are 5/8"NF thread so the Pinto one would not work.
I have some really bad bump steer with the 2" lowering springs on my car. Eventually I will replace everything with DSE, GW or Speedtech but in the meantime I would like to reduce this problem.
Is it worth the hassle I should I just buck up for the Baers?
Thanks in advance