[1970camaroRS]

Here's the 6LS installed on the firewall. It ALMOST fit the exact same footprint of the Mallory HyFire IV box I had there before. Just had to really force one screw in to make a new hole for itself.



Now for the moment you've all been waiting for. Ok some of you have been waiting for. The installation of the alternator bracket and adaptor/spacer I fabbed earlier. https://lateral-g.net/forums/show...3&postcount=78













It does sit a little high, but that's because I used the upper outside hole on the head instead of the lower one I mocked it up with. I like the belt angle and clearance this position gives me. However, not sure if it will clear the hood. Actually thinking it won't after giving a good look at it. I will give it a shot with my old hood I have sitting outside after it dries off.