Engine Specs
ok - here you go
ZZ4 block - line honed, bored & honed w/plates, decked, balanced
ARP main bolts
clevite rod bearings
acl cam bearings
brass freeze plugs
ARP oil pump rod
ZZ4 oil pan / windage tray
3.750 COLA crank
cloyes double roller timing set
6" crower rods
SRP pistons
speed pro rings
COMP roller cam & lifter set = (p/n 08-000-8)
gross lift = .520/.540
DURATION @.006 TAPPET lift 288/293
installed @106 intake centerline = duration @.050 236/242
fel-pro head gaskets
1.6 rockers
arp head bolts
modified 750 holley
air gap intake
MSD dist
pro-topline alum heads (123 4000 20a 4350 0502)
compression ratio is @ 9.5:1 / runs on pump gas
let me know if there are any questions, please
Last edited by jay web; 01-30-2006 at 08:08 AM.
|