Quote:
|
Originally Posted by dennis68
I am running the Impala 9" version. It uses a full size ball joint taper and full size wheel bearings/seals. For a budget hub I am going to cut off the rotor hat from a pair of full size rotors and machine the hub OD to fit a generic rotor hat.
|
Make sure you get the correct ones. Not all Full size hubs used the same inner bearings. You'll need ones that use the larger BR5 inner bearing found on the 69-76 Impala/Caprice. 78-93 used the smaller BR6 bearing. The '85 Caprice hubs that I'm using will not work with the Coleman spindle.