If the tank already has a -10 out, might as well stick with it. Won't hurt anything.
The other thing you could do is run -10 from the tank to your fine-mesh filter, and run -8 from the filter out.
Rick sets up his tanks with an pre-pump filter, right? (should be 100 micron.) You'll want to install a 10 micron filter after the pump.
Troy
__________________
1969 Chevelle
Old setup: Procharged/intercooled/EFI 353 SBC, TKO, ATS/SPC/Global West suspension, C6 brakes & hydroboost.
In progress: LS2, 3.0 Whipple, T56 Magnum, torque arm & watts link, Wilwood Aero6/4 brakes, Mk60 ABS, Vaporworx, floater 9" rear, etc.
|