View Single Post
  #59  
Old 03-21-2011, 09:44 AM
The WidowMaker's Avatar
The WidowMaker The WidowMaker is offline
Senior Member
 
Join Date: Jan 2008
Location: Huntington Beach, Ca
Posts: 773
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
The chassis deal is something in thoughts right now that will not ditch everything I have now so it not much more work, that is if this deal comes though on a factory replacement chassis. I am not starting from scratch on a complete suspension for this build that is for sure.
ha, i hope you have more restraint than me. it could mean just a few changes, but it opens the door for more really bitchen changes. i wouldnt be able to hold back.

Quote:
I have meaning to get with you on the front coil springs you used.
i went with the circle track 575s, but they will most likely swap out to 650+ once its on the road. my initial thought was less spring with a larger bar, but with limited ground clearance, more spring might be needed. i started with spring spacers but ran into clearance issues and built these.



__________________
"The WidowMaker"
70 Chevelle Pro Touring - Garage Built, Backyard Painted
Custom 4 Link & Watts, Rushforth Wheels, Ats Spindles, McLeod RXT Twin Clutch, T56 Magnum, C6Z Calipers & Ring Bros Hinges
Special Thanks To: Rushforth Wheels ; Kore3 ; SC&C
Build Thread : https://lateral-g.net/forums/show...ght=widowmaker
Reply With Quote