Quote:
Originally Posted by killer69
one thing you MUST DO!!! is wipe the tubes with rubbing alcohol prior to starting the motor to remove any finger prints, if you dont they will burn into the pipe and you will never get them out.
Stainless works sells a product
http://www.stainlessworks.net/cart/p...oducts_id=1305 |
Thanks for the tip Blake. I will definitely do that.
Quote:
Originally Posted by John510
Do they hang down lower than the oilpan?
|
I will check that the next time I'm out in the shop. I hope to head out on Thursday as it's a day off. I'm going to say yes though. If you look at the last pic that is posted that shows how they hand down below the frame, off to the right is the oil pan and it does look like they hang a bit lower.
__________________
Mike
Pro Touring 68 Acadian(Nova)
Speedtech subframe with high clearance control arms
Prodigy Bar rear suspension
Ridetech single adjustable coilovers
Wilwood 12.2" brakes
New Gen Splitters
LS3 and TKO600
Link to my build:
https://lateral-g.net/forums/showthread.php4?t=14349
