Greg,
I've been to the dyno a few times over the years, but 99.9% is done on the street or at the track, laptop on the passenger seat. Best case scenario is a buddy manning the laptop so I don't pass as a drunk driver.
My last car had the original Fast "classic" ECU, which was actually sold by Speed Pro at the time, and my current car is an older Accel Gen 7 that’s upgraded to the 5.5 firmware (sounds like you are familiar with the system). Both systems have widebands and you can get the car driving really well in no time. Maybe I'm a perfectionist, but I've found you can get 95% of the way there in the first hour or so [with the wideband system] where there is no discernable driveability issues ... That last 5% of tweaking takes quite a bit of time, at least for me.
First aftermarket ECU I retrofitted was a Haltech F3 into an early 3rd gen Camaro, back when it was far more popular to take off FI for a carb than vice versa!
Quote:
Originally Posted by GregWeld
Eddie --- Have you had the car on the rollers during a "tune"? Or are you trying to do this all seat of the pants?
|