Well now this is a full blown pissing match.
Keith, again, things are not EXACTLY as your stating. We did the 10K on 2 cards to get the charge off for you (your request) not even knowing what the final order was as the emails below will make clear.Alsom before the final details we even done we sent A/C system, Radiator and headers immediatly which burned a good bit of that. Then we reicvied the final payment for the order on thanksgiving week.
Only modifications to this email transcript is removing your e mail address and phone number.
I will post my notes in
bold.
Check sent below, we recived while away on Thanksgiving, booked it in on the 29th of November when we returned.
From:
[email protected] (Add as Preferred Sender)
Date: Mon, Nov 22, 2010 8:43 am
To:
[email protected]
Folder From Subject Date Size
Frank,
I sent the last payment off on Friday ($8500). I couldn't find my checkbook, so I just got a certified check from the bank. I put it inside an envelope taped onto the box with the Vintage controller inside.
Please let me know the status of everything. Are you providing a gas pedal with the electronic sending unit?
Regards,
Keith Wright l l |
[email protected] | O:----------------
Below is a continuous email transcript almost back to inception.
On November 11ths you agreed it would be best to make all the big stuff (Engine / trans) show up at once as you was picking it up at the airport and stuff can only sit so long. NOW AGAIN, I realize you did not mean 4 months later! But this explains exactly why I ordered the trans kit when I did, which then turned out to be back ordered. At this time I had NO CLUE we would stare down these back orders
From:
[email protected] (Add as Preferred Sender)
Date: Thu, Nov 11, 2010 1:17 pm
To: <
[email protected]>
Folder From Subject Date Size
Frank,
You brought up a good point yesterday about the delivery. It would be beneficial if the engine and tranny were scheduled to be picked up by me at the same location on the same day since they will require a forklift. I wasn't sure if you had already planned it this way.
Also, just to re-cap, the nearest airport to me would be Hobby airport in Houston.
Regards,
Keith
From: <
[email protected]>
To:
[email protected]
Date: 11/10/2010 10:24 AM
Subject: RE: Fwd: Invoice details
--------------------------------------------------------------------------------
Call you in a few minutes
Thank You
Frank Serafine
Prodigy Customs
Pro Touring Specialist
www.ProdigyCustoms.com
407 832 1752 Direct line
Below you were already reciving parts towards that $10,000 you sent, We only took the $10K because we knew the other stuff would be badly delayed
-------- Original Message --------
Subject: RE: Fwd: Invoice details
From:
[email protected]
Date: Wed, November 10, 2010 11:19 am
To: <
[email protected]>
Frank,
I got most of the AC parts in yesterday. It looks like they sent a polished instead of an anodized black one.
Regards,
Keith Wright l |
[email protected]| O:
Here I tell you you can pay whenever, no pressure this is Oct 15, you paid on Noveber 22 we recived
From: <
[email protected]>
To:
[email protected]
Date: 10/15/2010 08:20 AM
Subject: RE: Fwd: Invoice details
--------------------------------------------------------------------------------
Here I tell you, Make payment whenever your ready. No pressure!
Got it, will get it done this morning. You can do payment whenever your ready
Thank You
Frank Serafine
Prodigy Customs
Pro Touring Specialist
www.ProdigyCustoms.com
407 832 1752 Direct line
-------- Original Message --------
Subject: RE: Fwd: Invoice details
From:
[email protected]
Date: Fri, October 15, 2010 8:26 am
To: <
[email protected]>
Sweet,
Horizontal anodized black then. Hopefully I can make it fit in the factory a/c controls location.
I'll start shifting some funds around to pay you when you're ready.
Regards,
Keith
From: <
[email protected]>
To:
[email protected]
Date: 10/15/2010 07:20 AM
Subject: RE: Fwd: Invoice details
--------------------------------------------------------------------------------
What are the options on the AC controller? Do you have an anodized black? Yes, in horizontal and vertical
I plan on making a custom console, so no, I don't have a factory manual. No offset shifter option required then
What are the different shifter location options? The Magnum comes with a sweet shifter and comes out in a good position already for a custom console
What are the F-body pedals and Z-bar kit? I already have (what I believe to be) manual pedals for a 69 firebird. Ok, we deduct $99 then for the pedals
Concerning the drive shaft you're providing, I'm guessing the yokes will mate to my Currie narrowed rear end? Will it have to be shortened to fit once everything is in place? The driveshaft will be included in the price but will come after you install and give me a measurement from the tip of the tailshaft to the center of the rear u joint. This can be tomorrow or a year.
Thank You
Frank Serafine
Prodigy Customs
Pro Touring Specialist
www.ProdigyCustoms.com
407 832 1752 Direct line
Below is a Oct 15, we are still working out details of the engine trans order
-------- Original Message --------
Subject: Re: Fwd: Invoice details
From:
[email protected]
Date: Fri, October 15, 2010 8:14 am
To:
[email protected]
Cc: Keith Wright <kwright286-------.com>
Frank
Mernin!
Thanks for the email - I guess it slipped through the cracks in my gmail amidst all the junk I receive. Thanks for the prompt response and helping me work out the issue with the wheels. A few questions:
What are the options on the AC controller? Do you have an anodized black?
I plan on making a custom console, so no, I don't have a factory manual.
What are the different shifter location options?
What are the F-body pedals and Z-bar kit? I already have (what I believe to be) manual pedals for a 69 firebird.
Concerning the drive shaft you're providing, I'm guessing the yokes will mate to my Currie narrowed rear end? Will it have to be shortened to fit once everything is in place?
Just email or, better yet, give me a call on my cell
Regards,
Keith
Again, Oct 13, still working out details
From: Keith Wright <kwright286@--------com>
To: "keith. wright" <keith.wright@--------com>
Date: 10/15/2010 06:25 AM
Subject: Fwd: Invoice details
--------------------------------------------------------------------------------