[Roadster Shop]

A few shots of the chassis clamped in the jig being welded up. A lot of time went into the jigs and fixtures to make all future chassis the same as the first chassis.

Another visual re-design was on the rear section of the main frame rail in front of the rear wheel. On most chassis, the frame rail dives inward leaving a large gap. In our re-design we moved the body mount on the frame rail so we can have a continuous frame rail running down the rocker filling it out. The rear frame rail kick up is also now boxed in by the side rail and the center crossmember brace creating a rear torque box in the frame for added strength.