Quote:
Originally Posted by NAPA 68
I am hoping someone here has some experience with Aeroquip Teflon Hose. I have a fitting (fuel) that I cannot get to seal. I have the brass sleeve positioned properly, but still continue to leak from the backside of the fitting(not the flare).
Any thoughts?
Thanks,
Tim
|
The teflon liner has to be cut very straight and clean. After cutting the hose I usually trim the very end of the liner with a razor blade to get it completely straight and remove any burrs or rough edges on the inside of the teflon liner. It sounds like this may be your issue; if the teflon isn't completely straight and burr-free it will leak.