I used some stud mounts with rod ends from coleman on my 90 corvette when I made rod end linkage tie rods in the rear. Looks like something similiar might work if you can find the right stud. There are a variety of different tapers and sizes, most for 5/8 threads from Coleman. Give them a call and see if one of these has the taper you need: 833-201, 833-111, 808-950, 808-951.
Good luck
__________________
1970 Mach I 380 Dry Sump + lots of mods
1990 C4 Corvette 400 in solid roller
1965 Corvette - back to life some day
1970 1/2 Z28 project car
Last edited by funcars; 05-09-2011 at 09:02 PM.
Reason: more explanation, less confusing
|