Oops is right and the part that has me hot headed is I noticed AFR was sending me the straight plug heads when I sent them angle on the warranty. They claimed the straight were a better choice due to not being able to gaurantee the plug holes were in the exact same location! Angle would have worked perfect but I have put them on and also had them milled down at AFR so returning I am guessing is out.
I guess either short plugs with possibly an extra 1/4 or 1/2 inch header flange on there as a spacer and or possibly accels new ceramic plug boots may be an option.
Maybe new or custom built headers instead but $$$$ is tight and time too.
It never ends......
|