Quote:
Originally Posted by MarkM66
Those plates that come with the ES mounts are to stop the mount from distorting when bolted directly to an engine block. Since most engine blocks use mounting bossed which extend from the block.
If you bolt them to a adapter plate, these would not be needed.
The "dampening qualities" come from the poly material inside the mount.
|
Ahh, I gotcha. I'll probably try it with the mounts that I have then without the compression plate before I try the other ones. I think they 'might' fit without the compression plates.
I took some quick dimensions of my pedestals, which are as follows:
Driver's side:
2.5" tall
2-5/8" width
Passenger's side:
2.75" tall
2-5/8" width
The energy suspension mounts I have right now are pretty much 2-5/8" wide as well, so the fit is very snug.