We actually built an Aluminum fuel tank for the car. we cut out the entire trunk from frame to frame and the rear to the factory lap joint at the front of the trunk. then welded in a cross member to mount the shocks and internally mount the tube type sway bar, the end links are actually in the inner fender well and can be seen behind the brake rotor. Then built a fuel tank to fit the hole that was left and the tank is now the trunk floor. with enough room for the exhaust to run down the side with the muffer mounted in the back up behind the rear tire ( where the leaf springs used to sit) and then the tubing flows into the side of the exhaust tip and then out the back.
As for the wheels they are made by Asanti and are 3 peice forged. not cheep but not as expensive as HRE's and they have some very nice Euro styles. the beaumont on the site has them as well but a different style.
|