Quote:
Originally Posted by Sparks67
Mine are welded and looks really nice up front. We also removed the embelm holes and smoothed the factory spot welds that is on the fenders and the hood. Front bumper bolt heads were cut off and the studs were sunk about 1/32" down. We built up the bumper with weld, and spent a lot of time smoothing it. Typically, if you don't do this then the bolt heads will pop back through. The bumpers were sent out and then chromed.
Jeff
|
x2..I did exactly the same as everything listed by Sparks, and brought the bumpers in closer to the body also
