Quote:
|
Originally Posted by syborg tt
[IMG]Hopefully by the end of this weekend I'll have the car on the ground. I need to set up final ride height. I have to measure for wheel size & offsets. I plan ordering the wheels next week. Looks like 18X8 front & 20x11 for the rear. I'll keep you posted![/IMG]
I have an awesome tool that you are welcome to borrow. for setting up the wheels and the backspace. It was sure a life saver on my project. It allowed us to mount the wheels during fabrication and run it thru the suspension travel and turning.
 |
That is really cool tool. I just may take you up on the that offer, THANKS!Where are you located anyways? I got the car back on the ground today (I'll post pics tomorrow or Monday) I have a 18x8 (5" backspace w/ a 245/40 on it. Looks like everything will clear. It's close but should work. I'll probably end up running 18x7.5 with 235/45. That should clear eveything no problem. I still have to do the rear. Hopefully I'll get if figured it out tomorrow. Ran out of time today. Car doessit awesome though. Ride height up front has the rockers 4.5" front & the rear is at 5.75". I may go a shorter tire to get down further. Like a 305/40 vs 295/45. The 305 is 1" shorter (but 1/2" wider
) than the 295. We'll see. Ill have a better idea by Monday.