Quote:
Originally Posted by bdahlg68
Lots of plug welding and sanding later, the cowl is in and so is the DSE fill plate. Still some plug welds to do and some places to weld on the fill plate.
Question! Do I really need to tack every single spot, ors every half inch ok???
 |
I TIG welded the one I just did with Silicone Bronze rod -- it's low heat makes it ideal for NON structural --- but since you cut the old one out - you need to have some structure - I'd weld it solid - just watch your heat. You're going to have to bodywork that big flat area one way or the other if you want it to look good.