Yes it is a 58x reluctor wheel but I had sent the box back to get updated to the ls2/ls7 style computer along with the matching harness. I have the password now but it still will not crank. I still do not pass the BAL test. The dot stays red. I have verified I have signal from the cam sensor all the way to the computer. I can turn the motor over and see the signal go in and out as it passes over the raised cam sprocket. Same with the crank. It says in the ignition setup guide that my cam and crank signals are occuring at the same time and I need a new cam sensor or change the relationship somehow between the 2 pulses. I don't really know how to do that.
|