Quote:
|
Originally Posted by dennis68
I have spoken in depth with Rory over at Coleman, I am going with Impala aluminum hubs drilled with a 5X4.75 pattern. The hub snout is 3" and the rotor drive plate is part of the backside of the hub. The studs are still 5/8" but McMaster has a solution to that...1/2X20 threaded coil inserts with stake in place drive pins.
|
They told me they dual dill the aluminum hubs now with both 5x5 and 5x4.75 wheel stud patterns. For an extra $25 per hub, they'll drill the second set of holes for 1/2" studs instead of 5/8".