[ironworks]

So while we were out on the road, The boys at the shop were hard at it. The 48 chassis is still waiting for the body to come back from paint.



We made some slick tabs to hold the Upper Bleed lines to connect to the radiator from the water jackets to hold the Line neatly.


We did some work to the bolt on steering arms to get the bumpsteer down to .054 over 5" of travel. We are then having new arms machined for that tie rod position.


The 1960 ford truck, is getting some small details done to keep the owner of the 48 truck interested who is having this built for his son-in-law. We did some hood mods to clean up the grille opening.






You will have to see it with the emblem installed and the center done. It sure likes like it should have.